COMPOCEL® WP is a sandwich panel with marine plywood skins and a polypropylene core
This panel with okoumé plywood surfaces with polyurethane bonding is mainly used for the creation of light, veneered or lacquered furnishings. The cost is competitive and the skins have good resistance to humidity.
A - SKINS IN MARINE PLYWOOD* quality Okoumè
Thickness: da 1,5 a 8 mm
B - STRUCTURAL ADHESIVE
C - CORE IN POLYPROPYLENE HONEYCOMB
*Other qualities of plywood on request
Dimensions
Applications
Technical datasheet
Panel’s weight Ø8 80kg/m3 (Ø 1/4”) |
||||
|
• Thickness’ tolerance ± 0,3 mm |
||||
Total thickness mm |
10 |
15 |
20 |
25 |
SKINS’ thickness mm |
1,8 + 1,8 |
|||
CORE’S thickness mm |
6,4 |
11,4 |
16,4 |
21,4 |
|
Weight kg/m2 |
3,1 | 3,5 | 4 | 4,4 |
Characteristics of the polypropylene honeycomb |
|||
|
Type |
8.80 |
T30* |
T30F75** |
|
Cell size mm |
8 |
||
|
Colour |
white |
||
|
Density kg/m3 |
801 |
||
|
Compressive strength MPa |
1,5 |
1,60 |
1,60 |
|
Compressive modulus MPa |
70 |
||
|
Shear strength MPa |
- |
0,50 |
0,50 |
|
Shear modulus MPa |
- | 12 | 13 |
|
Effective temperature range °C |
from -30 to +80 |
||
|
Maximum width mm |
1400 | 1500 | 1500 |
|
Minimum width mm |
1002 |
||
|
Maximum length mm |
29502 |
- | - |
|
Width tolerance mm |
+/- 4 |
||
|
Tolerance length mm |
+/- 4 | ||
|
CORE’S thickness mm |
7 - 100 |
7 - 65 |
6 - 65 |
* T30: - thermowelded foil 30gr/m3 for adhesion.
** T30F75: thermo-welded tissue for wet lay-up.
1 Density referred to the block dimension
2 on request
- Other dimensions, core heights and types upon request.
- Minimum order quality for each type: 10 pallets.
LIABILITY DISCLAIMER: The above data are to the best of our knowledge correct and are intended to give information about our products and their potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular application. We reserve the right for technical changes without further notice. We guarantee impeccable product quality under our terms of sale.
IMPORTANT
To allow us to offer you a panel with particular finishes or colors without minimal pigment variations, it is recommended to place an overall order , so that we can plan the production with the rolling mills that will carry out the painting of the sheets in a batch.