Sandwich panel for marble lightweighting and marine applications

PETSTEP is a sandwich panel with a PET foam core and glass fibre skins impregnated with epoxy resin, designed for applications where the machining and installation process is a key factor.
It is particularly used for lightweighting marble, granite and mosaics, especially in the marine sector, where weight reduction and the simplification of operational stages have a direct impact on production times, costs and system reliability.
The structure of the panel allows lightweight elements to be produced while maintaining good dimensional stability. Depending on the density of the core, it is also possible to create direct fixings, reducing the need for inserts or complex anchoring systems.

Technical features

PETSTEP is composed of:

A - EXTERNAL GLASS FABRIC SKINS
500 g/m² impregnated with epoxy resin
 
B - CLOSED-CELL PET FOAM CORE
Available densities: from 80 to 200 kg/m³;
 

The panel configuration allows an even distribution of loads and provides a suitable surface for the direct bonding of natural stone and other cladding materials.

Dimensions

Configurations

PETSTEP can be adapted according to the application:

  • Different PET core densities
  • Possibility of using recycled PET
  • Variable thicknesses
  • Skins in standard, biaxial or quadraxial fabric

Higher densities allow simplified or direct fixing systems to be used under specific conditions.

Applications

Lightening Marble Mosaics
Yachts and Shipbuilding
Floor panels
Interiors
Building and restoration

Technical datasheet

Data +
Technical data sheet for standard panels (dimensions, materials and special finishes on request)
TECHNICAL CHARACTERISTICS OF PANEL
panel thickness mm
from 5 to 60
panel size mm
standard 1000x2400 other dimensions available on request
thickness’ tolerance mm 
±0,4
dimension’s tolerance mm
 ± 30
skins’ thickness mm
0,5
glass fibre skin type
Glass fibre Plain 500 gr/m² 600 tex
core materials
PET foam core
core thickness µm
from 4 to 59
core density Kg/m³
from 80 to 200
adhesive
two-component epoxy
PANEL PHYSICAL AND MECHANICAL PERFORMANCES
panel thickness mm
10
20
30
10
20
30
panel weight ‡ Kg/m2
3,1
4,1 5,1 4,0 6,0 8,0
core material PET foam core PET foam core
foam density Kg/m³ 100 200
compressive strength ASTM C 365-365 M  MPa
1,3
3,79
shear modulus  MPa
24
59
yield load ASTM C 393† N 300 650 950 500 1050 1650
deflection at yield load  ASTM C 393†  mm 21±2 12±2 8±2 33±2 17±2 12±2
skins E Elastic Modulus ** Mpa 25’000±1’000
moment of inertia I mm^4/m 18'400 76'000 174'000 18'400 76'000 174'000
middle resistance to peeling  ** ASTM D1781 > 265 N/76mm - 17 Nm/m > 300 N/76 mm - 23 Nm/m
thermal conductivity (referred to foam only) a 23°C  W/(m·°K) 0,033 0,040
thermal transmittance U (referred to foam only) a 23°C  W/(m²·°K) 3,7 1,7 1,1 4,4 2,1 1,4
service temperature  ** °C - 40/ + 70

**      Tested by Internal Laboratory
†       Sample dimension with 4 support points (L, W) 540x50 mm

Disclaimer

LIABILITY DISCLAIMER: The above data are to the best of our knowledge correct and are intended to give information about our products and their potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular application. We reserve the right for technical changes without further notice. We guarantee impeccable product quality under our terms of sale.

IMPORTANT

To allow us to offer you a panel with particular finishes or colors without minimal pigment variations, it is recommended to place an overall order , so that we can plan the production with the rolling mills that will carry out the painting of the sheets in a batch.

Request a quotation