Backlighting stone is an increasingly common technique used to enhance natural materials in architecture and interior design.
Caricamento tempo di lettura... | 28.04.2026Backlighting stone is an increasingly common technique used to enhance natural materials in architecture and interior design. By integrating light, the natural translucency of certain stones is enhanced, highlighting their veining, layering and colour variations. However, this is not just an aesthetic effect. Backlit stone is a technical system that requires a balance between materials, light and structure. The final result depends on how these elements are designed and integrated.

Backlighting involves placing a light source behind a stone slab so that light can pass through it. To achieve this effect, the stone must be processed to reduced thicknesses, typically below 10 mm. This allows sufficient light transmission but also reduces the mechanical strength of the slab. As a result, the material becomes more fragile and requires structural support to ensure stability. Reducing thickness also significantly lowers the overall weight. This makes backlit stone suitable for applications where weight is a constraint, such as in the marine sector or in large-format installations. This aspect is explored in more detail in the article on marble lightweighting and the use of sandwich panels, which looks at how composite materials help reduce weight.
The ability to backlight stone depends on its translucency, meaning its capacity to transmit light. This property is determined by the material’s composition and internal structure.
Onyx is the most well-known example, but certain types of marble, quartz, semi-precious stones such as blue agate, and some quartzites can also be used, provided their structure allows light to pass through. While the choice of stone directly affects brightness and visual impact, it is only one part of the overall system.
In most applications, backlit stone is bonded to glass or acrylic (PMMA). Glass provides rigidity and dimensional stability, but it significantly increases weight and remains relatively fragile, especially during handling and installation. Acrylic is lighter, but more sensitive to temperature changes and does not contribute meaningfully to light diffusion.
In both cases, these materials allow light to pass through, but they are not designed to control how light is distributed. This can result in visible light sources or uneven illumination, requiring additional effort to manage the lighting system.
Another critical aspect is bonding. Glass and acrylic are not inherently compatible with the epoxy resins typically used to bond stone, making the process more sensitive and less predictable.
To address these limitations, sandwich panels specifically designed for backlighting applications are increasingly used. These panels consist of a lightweight core and outer skins, typically made of glass fibre. This structure combines reduced weight with sufficient rigidity to support thin stone slabs. From an optical perspective, sandwich panels do more than transmit light. They help regulate its diffusion, improving uniformity and reducing the visibility of LED sources or localised bright spots. The glass fibre skins also play a key role in bonding. Their compatibility with transparent epoxy resins allows for a more controlled and stable adhesion between the stone and the support. Overall, sandwich panels reduce system weight, improve light quality and make the production process more reliable. These characteristics are particularly relevant in marine applications, as discussed in the article on lightweight marble for yachts and ships and the comparison between honeycomb and foam cores.
.jpg)
The development of sandwich panels for backlighting applications is based on practical experience and ongoing collaboration with stone processors and industry professionals. The goal has been to address specific limitations associated with traditional supports such as glass and acrylic, particularly in terms of workability, light management and process reliability.
Different panel configurations have been developed to meet varying performance requirements.
Clearstep uses a polypropylene core, a naturally white and lightweight material with high light transmission. This configuration allows for higher light intensity, although in some cases the internal cell structure may be slightly visible.
Clearpet uses a PET core with a more homogeneous structure. This results in a more even light diffusion and a cleaner visual appearance, with fewer visible internal variations, although with slightly lower light transmission.
In both cases, the use of glass fibre skins ensures material continuity and improves bonding with the stone, thanks to compatibility with transparent epoxy resins.
The choice between these solutions depends on the specific application and the desired balance between brightness and visual uniformity.

Backlit stone is used in applications where light plays an active role in the design.
Typical uses include wall cladding, decorative panels, counters and feature surfaces in hospitality, retail and high-end residential environments. In the marine sector, the combination of visual impact and weight reduction makes these solutions particularly suitable.
In all cases, performance is influenced not only by aesthetics, but also by weight, ease of installation and light distribution quality.
Backlighting stone requires a design-driven approach in which each component contributes to the final result.
Reducing thickness improves light transmission and lowers weight, but also requires an appropriate support system. Traditional solutions can achieve the desired effect, but present limitations in terms of light control and process management.
Sandwich panels represent an evolution in this field, as they integrate structural support, light diffusion control and material compatibility. The result is a lighter, more consistent and more predictable system throughout manufacturing and installation.
Our technical team supports the selection of the most suitable material, integrating mechanical, production and regulatory requirements.
Contact us
Marble lightweighting: how sandwich panels make stone lighter
Lightweight marble for yachts and cruise ships: sandwich panels with honeycomb or foam core?
Petstep: PET foam sandwich panel for lightweight stone and marine applications
Looking for more information or technical advice on the most suitable panel for your project?